set BOOSTER(1KG) & ADDITIVE (1L)

$110.00

FLOOR MEDICS BOOSTER is a fine, absorptive clay and NANO-scale abrasive cleaning powder designed to remove deep-set oil, grease, and stubborn stains.

FLOOR MEDICS ADDITIVES is an effective blended liquid for removal of wood stains and organic stains on stone and tiles. It may also be used full-strength to remove oxidation stains.

  • Effortlessly Remove Wood and Organic Stains: for stubborn wood stains and organic blemishes, our product works with unmatched efficiency, lifting even the most difficult marks with ease.
  • Full-Strength Power for Oxidation Stains: tackle tough oxidation stains by applying our solution at full strength. It’s designed to penetrate deep and eliminate stains that other products leave behind.

 

FOR USE:  Recommended for use on Natural Stone, Agglomerate, Porcelain, and all Tiles material


 

SET SIZE:

  • Booster is available in 1Kg / Tub
  • Additives is available in 1Litre/ bottle
Category: Tags: ,

 

PROCEDURE AND APPLICATION METHOD FOR DEEP SET STAIN:

Equipment Required: Bowl, household gloves, plastic putty knife, and sponge.

Prepare the Surface: Start by sweeping or vacuuming the surface to remove any loose debris.

Mix the Paste: In a bowl, combine several tablespoons of Floor Medics Booster with Additives, mixing thoroughly to create a thick, pliable paste.

Let the Paste Set: Allow the mixture to sit for 30 minutes or longer to ensure proper consistency.

Apply the Paste: Using a plastic putty knife, apply a 5 to 8 mm thick layer of paste directly over the stain, extending at least 3 cm beyond the edge of the stain for complete coverage.

Let It Stand: Leave the paste on the stain for 24 to 48 hours, or until it hardens completely.

Remove the Paste: Carefully remove the hardened paste with a plastic putty knife, being cautious not to scratch the surface. Wash off any residue with Floor Medics Stone Cleaner and a sponge.

Repeat if Necessary: If the stain persists, repeat the procedure. If the area darkens from absorbed moisture, it should dry completely within 1 to 2 days.

General Guidelines: This recommendation serves as a general guideline for the removal of deep-set stains from porous tile, natural stone, and masonry. Actual requirements may vary based on the type of tile, method of application, and the extent of the stains.

 

IMPORTANT: READ PRODUCT DIRECTIONS THOROUGHLY PRIOR TO USE.

ALWAYS TEST FIRST. Test on small area before actual application.
Mop or wet vacuum up residue.
Rinse thoroughly with clean water.

DO NOT KNEEL on any surface where solution has been applied and not thoroughly rinsed off.

 

For more information, kindly upload Technical Bulletin 

Weight 5100 g
Brand

FloorMedics

Reviews

There are no reviews yet.

Be the first to review “set BOOSTER(1KG) & ADDITIVE (1L)”

Your email address will not be published. Required fields are marked *

Start typing and press Enter to search

Shopping Cart

No products in the cart.