COVERAGE:
Varies, test to determine amount of product needed, depending on numbers of stains present
METHOD OF APPLICATION FOR DEEP SET STAIN:
Equipment required: Bowl, household Glove, plastic putty knife and sponge.
– Sweep or vacuum surface.
– Mix several tablespoons of Poultice Booster with FloorMedics Poultice Additives Remover in a bowl to form a thick, pliable paste.
– Let it set for 30 minutes or longer.
– Apply a (5 to 8 mm) thick layer of paste directly over stain with at least a 3 cm overlap beyond edge of stain.
– Allow paste to stand on stain for 24 to 48 hours or till the paste become harden.
– Remove Mixture Paste without scratching surface with a plastic putty knife and wash off residue with Floor Medics Stone Cleaner and sponge.
– Repeat procedure if necessary. If area darkens from absorbed moisture, it should dry completely within 1 to 2 days.
– This recommendation is intended as a general guideline for the removal of deep-set stains from porous tile, natural stone and masonry.
– The actual removal requirements may vary depending on type of tile, method of application and amount of stains to be removed.
LIMITATIONS:
Do not allow product to come in contact with any non-recommended surface.
PRODUCT OF SINGAPORE
Reviews
There are no reviews yet.